Gen III Hemi 45 Degree Oil Filter Adapter for 5.7L, 6.1L, 6.2L, & 6.4L Engines. Used with different applications to gain suspension clearance to mount oil filter on different obstructed area.
NOTE: 1-Built with a cast spout to direct oil when filter is changed. Some applications will require cutting Cast Aluminum Spout from Adapter
2-Sometimes with 45 degree adapter, some stock K frames may require slight modification for addition clearance
3-The present version we are using does not have the temperature sender provision/ it is a smooth casting
4-The present version we are using, uses the 1990-2008 Oil Filter. When using on a 2009 and later engine, the earlier 5.7L and 6.1L engine oil filter is to be used
This also makes it a lot cleaner to do oil changes, with the nice spill plate. Easy install, simply remove oil filter and threaded adapter.
45DEGREE 6.1/6.4 Uses 2008 and up oil filter **** SOME ADDITIONAL CLEARANCING OF K FRAME MAY BE REQUIRED ON SOME APPLICATIONS GENERALLY SPOUT MAY NEED TO BE REMOVED FROM BODY..some applications require some K frame messaging oil filter adapter
Part # BPE61F680 5.7L, 6.1L, 6.4L (392), 7.0L (426) G3 Hemi 45° Oil Filter Adapter
7.0L "426" HEMI
6.4L "392" HEMI
6.1L SRT-8 HEMI
5.7L HEMI
6.2L HEMI
This oil filter adapter is perfect for all installations. This BPE G3 Hemi Oil Filter Adapter was specifically designed for difficult installs.
Use this when your Installing a 5.7L or 6.1L Hemi Into your 60s-70s Mopars, and using Stock K-Frame with TTI Style Mounts, or after market tubular front ends. Such as an AlterKation front end. This adapter will give you all the clearance you need for these resto-mod installs.
A required item when using BPE 9011 Engine Mounting Brackets for Gen III Hemi Installation into 1972-1993 Dodge Full Size Pickups
This also makes it a lot cleaner to do oil changes, with the nice spill plate. Easy install, simply remove oil filter and threaded adapter. Then place the new BPE G3 Hemi Oil Filter Adapter in the oil filters place (All seals included), thread and tighten the 3 bolts. Install oil filter.....Done Deal!
(Comes with everything needed to modify your oil filters location, to move it out of the way)
