5.7 Complete Computer Management Kit
This complete Kit, designed by Mopar Performance, has all the components to get you up and running fast.
Kit Include: Harness, Pre Programmed Computer, Oxygen Sensors, Air Charge Sensor, Computer Management Fuel Block, Fly By Wire Accelerator Pedal, and Instructions.
The is Actual Kit is designed to work with the very latest 2013-2022 5.7L engines only.
The Kit (as designed) is only suited to work with manual transmissions or NON computer shifted automatics. This kit will not work with any computer shifted transmission , including: A580/NAG1, 545RFE, or any newer computer managed transmission
Can be made to work with the 8HP70 & 8HP90 Transmissions with purchase of addtional 8 speed management kit (optional)
NOTE:1 This management Kit will only work properly with 2013 and later 5.7L engines.
2- Specifically designed to work with latest Mopar Performance 5.7L Crate engine, which is an engine from a Challenger
May work on other Engine Combinations, but we can not assure or warrant you trying on anything not specified.
3-Harness will require modifing when using on a drivers side starter applications
If you Purchase this Management Kit along with our 5.7L Engine Assembly, your package is warranted for 2 years from the date of purchse by FCA (Mopar Performance). Engine and management system has to be purchased at the same time and must be on the same sales receipt to qualify. call for further details
As per FCA, PCM is unlock and can be retuned using something similar to HP Tuners products
This Package WILL NOT WORK ON EARLIER 5.7L , 6.1L, 6.2L AND 6.4L ENGINES
NOTE:1 This management Kit will only work properly with 5.7L Engines
BPE has an Additional Kit Available, not included in this kit, to make your Torqueflite 904, 998, 999, 727, and non Computer assisted 500 & 518 transmissions gain the mechanical action of throttle pressure required for there required operation. Go To BPE 3325S & 3325
PCM is already programmed but is unlocked and can be re-programmed
Instructions indicate, You may be required to program an indicated VIN #, into system with Mopar WiTech when completed
This Package WILL NOT WORK ON ANY 6.1L, 6.2L AND 6.4L ENGINES
