CENTER SUMP OIL PAN KIT DESIGNED TO WORK WITH MOST ALL A/B/E BODY STOCK FRONT K-MEMBER SUSPENSIONS ON INSTALLATION OF A 6.4L/5.7L WITH VVT ENGINES
FITS 2009-2016 5.7L TRUCK AND CAR ENGINES,2011-2016 6.4L ENGINES WITH VVT
COMES COMPLETE WITH CENTER SUMP OIL PAN, OIL PUMP PICKUP, OIL LEVEL TUBE & OIL LEVEL INDICATOR
NOTE: 1-WORKS WITH ALTERKATION FRONT SUSPENSION AND SOME OTHER AFTERMARKET FRONT SUSPENSIONS. AT THIS TIME, THIS PAN KIT WILL NOT WORK WITH CONTROL FREAKS FRONT SUSPENSION (USE 32000KITVVT)
2-MOST APPLICATIONS, REPLACING THE GASKET IS NOT NECESSARY. FACTORY WINDAGE TRAY HAS A PERMA GASKET AFFIXED TO IT. GENERALLY, THOROUGHLY CLEANING OIL RESIDUE FROM WINDAGE TRAY AND OLD SMEAR OF RTV FROM TRAY AND BLOCK IS ALL REQUIRED. DON'T FORGET TO PUT THIN SMEAR OF RTV BACK AT TIMING COVER, AND REAR MAIN SEAL MATING POINTS
3-CENTER SUMP PAN IS ONLY 6" DEEP (SEE ATTACHED ROUGH SKETCH COMPARING FRONT SUMP TO REAR SUMP PANS)
4-FOR 2003-2008 5.7L ENGINES AND 2005-2010 6.1L ENGINES USE 31000KIT
5-ALWAYS CHECK PAN DEPTH AND OIL PICK CLEARANCE, AND ADJUST IF NOT CORRECT. PICKUP SHOULD BE 1/8" FROM BOTTOM OF OIL PAN
6-USE 61R065AA OIL PAN BOLT SET WHEN REMOVING A CAST ALUMINUM OIL PAN AND REPLACING IT WITH THIS PAN OR ANY OTHER SHEETMETAL OIL PAN. THIS BOLT KIT IS 5 MM SHORTER THAN BOLTS USED ON CAST ALUMINUM PANS.
7-On 5.7L Engines you may need to order 61RA333AA Main Stud & 61RA756 Nut on many 5.7L engines that originally came with a front sump oil pan (such as Car Engines). The stud and nut supports the extended oil pickup to the rear of the engine. NOT INCLUDED
NOTE: WILL NOT WORK OR FIT ON 6.2L HELL CAT ENGINES
Use MOPAR RTV SEALER (5010884AD) for more than excellent sealing ability.
